High efficiency Advanced Automatic Climbing Scaffolding 
Guangdong Lingsheng Prefabricated Building Technology Co., Ltd. was founded in April 2018. Gold set as a professional service provider of prefabricated building, headquartered in the world famous manufacturing city Foshan, Guangdong.
LingChuang mold technology CO,.LTD is focused on climbing scaffold development, design, produce, and also provide service as sell, rent and being a sub-contractor. The manufacturing factory is located in Heshan industrial area, Jiangmen , Guangdong Province, with a registered capital of 158 million yuan. The factory covers an area of 100,000 square meters and the total construction area of 60,000 square meters.
Q: Are you trading company or manufacturer?
A:We are direct factory with 60,4000 square meters.
Q: How long is your delivery time?
A: The delivery time is within 5-45 days after received the deposit, please contact us for more details.
Q: What is your terms of payment?
A: 30% T/T in advance + 70% balance before shipment, or LC at sight.
Q: Is your product only sold as a whole?
A: No, we also sell it in parts.
Q: What is your main market?
A: Our main markets are Domestic Market, Middle East, South-East Asia, Africa, European etc.
Q: Can you accept OEM or ODM?
A: Yes, we have the complete produce line, we accept OEM or ODM.
Q: Can you provide special customized solution for us?
A: Sure, customized service is available, that is one of our business. Please let us know your idea.
Q: Can we visit your factory?
A: Sure, feel free to contact us before your visit. If you have any another questions, please feel free to contact us.
Name | Unit | Standard value | Note. |
Frame height | \ | 4-5 level of the floor | \ |
Frame width | m | 0.6-1.2 | Distance with the mainframe support and the building |
Support span | m | ≤6.0 | Curve or broken distance≤5.4 |
Length of cantilever | m | <2m,And shall not be more than 1/2 support span | / |
Average space between each hoist position | m | 4~5 | / |
The vertical spacing of the frame | m | 2 | / |
Anti-fall device | / | No less than one in any condition | The 24/7 process works with the concept of non-falling |
The minimum frame distance to the wall | mm | ≤200 | / |
Frame weight | t/m | 0.6-0.7 tons per extension meter | Each extension meter along the horizontal peri-perith |
The rate of the electric hoist | t | 7.5 | / |
Climbing speed | mm/min | 120-130 | / |
Electric hoist motor power | Kw | 0.5 | Single motor power |
Time for raise a floor | h | Normally 0.5 | Each set |
The lift control of the frame | / | Remote control | One main control, and hand on per person |
The frame simultaneously lifts the load control | / | Over or less than 30% of the fault point,it will alarm and an automatic shutdown | / |
Deviation allow for the pre-buried hold | mm | ±50 | / |
The carrying capacity of the operating layer | KN/square metre | Two simultaneous: 3.0; Three simultaneous: 2.0 | / |
Guangdong Lingsheng Prefabricated Building Technology Co., Ltd. was founded in April 2018. Gold set as a professional service provider of prefabricated building, headquartered in the world famous manufacturing city Foshan, Guangdong. LingChuang mold technology CO,.LTD is focused on climbing scaffold development, design, produce, and also provide service as sell, rent and being a sub-contractor. The manufacturing factory is located in Heshan industrial area, Jiangmen , Guangdong Province, with a registered capital of 158 million yuan. The factory covers an area of 100,000 square meters and the total construction area of 60,000 square meters.
Q: Are you trading company or manufacturer?A:We are direct factory with 60,4000 square meters.
Q: How long is your delivery time?
A: The delivery time is within 5-45 days after received the deposit, please contact us for more details.
Q: What is your terms of payment?
A: 30% T/T in advance + 70% balance before shipment, or LC at sight.
Q: Is your product only sold as a whole?
A: No, we also sell it in parts.
Q: What is your main market?
A: Our main markets are Domestic Market, Middle East, South-East Asia, Africa, European etc.
Q: Can you accept OEM or ODM?
A: Yes, we have the complete produce line, we accept OEM or ODM.
Q: Can you provide special customized solution for us?
A: Sure, customized service is available, that is one of our business. Please let us know your idea.
Q: Can we visit your factory?
A: Sure, feel free to contact us before your visit. If you have any another questions, please feel free to contact us.